12.9. Trunk lid
Trunk lid, hinge, rack (Sedan models)| 1. Trunk lid limiter 2. The hinged limiter, in the closed position 3. Insulating washer 4. Combinational bolt, 21 N. of m. |
5. The fixing clip 6. Gas-filled rack 7. Six-sided nut, 21 N. of m. |
Trunk lid, adjusting gap
Placement of the sizes
|
Size
|
Adjustment
|
|
and = 4.4 + 1.0 mm
| Adjust the hinge |
|
b = 6.5 + 1.0 mm
| Adjustment it is carried out when changing the triangular panel |
|
with = 9.9 + 1.0 mm
| It is regulated by the shift of stoplights |
|
d = 8.0 + 1.0 mm
| |
|
е = 9.75 + 1.0 mm
| Adjustment is made on a locking plate of a trunk lid |
The locking mechanism of a trunk lid in assembly (Sedan model)
| 1. A sealing ring for the lock cylinder 2. Draft of lever transfer adjustment: place the lock and the cylinder of the lock so that in draft of rachazhny transfer there was no free wheeling; fix draft of lever transfer on the lock and record 3. The jointed plug 4. Spring washer 5. A bolt with a six-sided head 6 N of m. 6. Spring pin 7. Clown remove carefully not to lose a spring ball 8. A bolt with a six-sided head 3 N of m. 9. Washer 10. Locking plate of the door lock |
11. A sealant, tear off a lining and paste on a shock plate of the door lock 12. Lock-nut, 3 N. of m. 13. Lock 14. A sealant, tear off a lining and paste on the lock 15. Lock cylinder for removal pull out a spring pin, remove the clown and by means of a key squeeze out the lock cylinder 16. Sealing ring 17. Lock 18. Spring 19. A spring ball, cover it with lubricant before installation in the lock cylinder |