a43d3481

12:14. Door lock


The door lock, draft of the lock in the lock assembly / cylinder in assembly
1. Lock control lever
2. Draft of lever transfer of the lock
at removal disconnect the lock
3. Control lever clip
4. Plastic washer
5. 16 N. of m.
6. Conical washer
two conical washers can be established if it is necessary for adjustment
7. Bolt of a locking plate of the door lock, 50 N. of m.
8. Door lock
9. A rope, for work in a door 		10. Clips, you watch the direction of the main draft in a clip
11. The condensing laying
12. Fixing plate of draft of the lock
13. Rotary clamp
for removal of a zazhi to turn on 65 °
14. 3 N. of m.
15. Door handle
16. External plate of the lock
17. Draft of lever transfer of the lock, lock cylinder
pay attention that draft is attached by means of the hinged plug

Door lock
1. A bolt with a cylindrical head, 3 N. of m.
2. Door handle
3. Lock cylinder
remove only by means of a key
4. The condensing ring
5. Plate 		6. Spring
7. A control lever with an insert
8. With-shaped clamp
9. Lock clamp
for removal to turn on 65 °

Door lock

Removal

PERFORMANCE ORDER
1) remove the decorative panel of a forward door
2) disconnect a clip of draft of lever transfer and extend draft
3) disconnect a rope
4) pull out the door lock from a hub 2
5) remove laying 3

Installation

Carry out installation upside-down, in view of the following:

PERFORMANCE ORDER
1) again to connect a rope, pull the lever 4 in the direction of an arrow; insert the screw-driver into an opening 5 to establish a rope into place
2) screw up all bolts with m 16 N.' moment.

The door lock in assembly (Coupet's model)

1. External plate of the door lock
2. Door handle
3. Washer
4. A bolt with a head under a face key
5. Draft of the lock – the lock cylinder
at removal displace the rotary plug
6. Rope
7. Clips
you watch the direction of the main draft in a clip
8. Draft of the lock
9. Door lock
10. A screw with a crosswise head
11. Fixing plate of draft of the lock 		12. Bolt, 16 N. of m.
13. Clamp
14. Clamp substrate
more than one can be established
15. The condensing laying
16. Door lock
17. The self-cutting screw with a ploskokonichesky head, 16 N. of m.
18. A clamp for a control lever
press on the coupling to remove draft of lever transfer of the lock
19. Draft of the lock
20. Draft of a control lever of the lock
21. Button of the door lock
22. Rotary clamp

Door lock (Coupet's model)

Removal

PERFORMANCE ORDER
1) remove the decorative panel of a forward door
2) disconnect a clip of draft of lever transfer and extend draft
3) disconnect a rope
4) pull out the door lock from a hub 2

Installation

Carry out installation upside-down, in view of the following:

PERFORMANCE ORDER
1) connect a rope, having pulled the lever 4 in the direction specified by an arrow
2) place the screw-driver in an opening 5 to establish a rope into place
3) screw up all bolts with m 16 N.' moment.

Cover of the door lock, removal

PERFORMANCE ORDER
disconnect a cover from a door covering

Cover of the door lock, installation

Carry out installation upside-down.

Decorative covering of the handle of the lock, removal

Prevention

The decorative covering of the handle of a door has to be removed before removal of the handle not to allow damage of the painted surface of a decorative covering.

PERFORMANCE ORDER
1) lift the door handle
2) pull out the lock probe in the direction specified by an arrow
3) remove a decorative covering

The door lock (Coupet's models since 1990 model years)
1. Adjusting detail
squeezing the lever on a carving and it can be adjusted through a fixing opening
2. Lock opening
3. Door lock
4. 16 N. of m.
5. Plastic washer
6. Conical washer
two conical washers can be in case of need established
7. Pin of a latch of 50 N. of m.
8. A rope for the internal lock of a door 		9. Clamp
pay attention to the provision of a rope in clamps
10. Clamp
for a detachment of a clamp remove a rope and turn a clamp on 90 °
11. The extending clamp
12. Hinged lever
13. Draft of the lever mechanism
14. The condensing laying
15. Door lock rope
16. Door handle
17. External covering of the handle of a door
18. 3 N. of m.

The door lock (Coupet's models since 1990 model years)

Removal

PERFORMANCE ORDER
1) remove the decorative panel of a forward door
2) turn the lever 1, having pulled a rope in the direction specified by an arrow and supporting in the necessary situation by means of the screw-driver through an opening 2
3) disconnect a rope
4) unscrew bolts
5) pull out the door lock from a clamp 3, sealants 5

Installation

Carry out installation upside-down, in view of the following:

PERFORMANCE ORDER
1) attach a rope
2) insert the door lock into a clamp
3) combine the door handle with the lock
4) adjust as it is required
5) send the driving mechanism 4 to the driving lever of the lock of a door; this operation can be observed through an opening for access