a43d3481

12:43. Sitting

The plait of wires and the block of switches represent one whole, indissoluble chain and therefore they cannot be removed separately.

Sitting components with the electric drive (Coupet's model)

1. Left power shaft
it is intended for sitting shift
forward and back
2. Sensor
is responsible for sitting shift forward and back
it is established only on driver's sitting
3. Lock-nut
4. The condensing rubber ring
5. Servomotor
it is intended for sitting shift
forward and back
6. The fixing clip
7. Right power shaft
it is intended for sitting shift
forward and back
8. The transferring mechanism
9. Servomotor
it is intended for adjustment of height of a forward part of sitting
10. Sensor
it is intended for adjustment of height of a forward part of sitting
it is established only on driver's sitting
11. A power shaft of the transferring mechanism
it is intended for adjustment of height of a forward part of sitting
12. The transferring mechanism
it is intended for adjustment of height of a forward part of sitting
13. A fixing bolt of the transferring mechanism
14. Control unit socket
for finding of the location
the socket use the suitable scheme of an electrical wiring
15. Lock-nut
16. Control unit
17. Fork of the socket of a plait of wires
for sitting with the electric drive equipped with the memory device

18. Lock ring
19. Laying
20. Right adjusting core
it is intended for sitting shift forward and back
21. Back limiter of the movement
22. Fixing bolts of a servomotor
23. Rivets
are intended for fixing of an arm of a spindle
24. Forward limiter of the movement
25. Plugs
26. Spindle arm
removal, grind off and take rivets
installation, fix by means of rivets or bolts of M – 5
27. The directing rail
28. The block of switches with a plait of wires
29. The right transferring mechanism
it is intended for sitting shift forward and back
30. A sitting frame with the directing rails
31. Fixing bolts of the transferring mechanisms
32. The back transferring mechanism
adjustment of height of sitting
33. Sensor
adjustment of height of a back part of sitting
it is established only on driver's sitting
34. Fixing bolts
are intended for fixing of the back servomotor regulating sitting height
35. Fastenings of the relay of giving of tension
36. Relay of giving of tension

Components of seatbacks with the electric drive (Coupet's model)
1. Sitting back framework
2. Fixing bolt of the side finishing panel of sitting
it is established in a lock pin of a back of sitting
3. Cap
get
4. Side finishing panel of sitting
5. Block of switches
6. The fixing latches of the block of switches
represents a part of the side finishing panel
for removal of the block of switches hook latches the screw-driver
7. Clip
before removing the side finishing panel hook a clip the screw-driver
8. Sensor
it is intended for adjustment of provision of a sinka of sitting
9. Socket fork
for determination of location of the socket use the suitable scheme of an electrical wiring
10. Fixing bolt
11. Servomotor
it is intended for adjustment of provision of a back
12. Fixing bolt
13. Lock arm
it is intended for fixing of a servomotor