a43d3481

12:29. The bearing element of a back door, the condensing stopper

Two washers with bowl-shaped dredging can be in case of need established.

Adjustment of the bearing element of components of a door

The window and framework of a door have to be adjusted too.

PERFORMANCE ORDER
1) weaken bolts
2) close a door
3) press on the bearing element of components of a door in the direction opposite to a roof and a rack
4) the assistant has to tighten at first the lower, and then top bolts
5) 20 N. of m.
6) be convinced that the bearing element is established, having pressed on top stronger
7) do not press a door framework
8) check all sizes

Holder of components of a door, sizes

 in the drawing the cross section of the left door is shown

with = 3.5 + 1 mm
d = 8.1 + 1 mm
1 – sealing flange
2 – door frame
3 – decorative overlay of a door
4 – window
5 – window sealing laying
6 – internal door sealing laying
7 – sealant
8 – a sealant at a window

the sealing edge 7 has to have contact on all contour of a rack and a decorative overlay of a roof 3

the external sealing flange of a window 8 should not support a decorative overlay of a roof 3