9. Suspension brackets, wheels
Forward suspension bracket – drafts and half shafts
| 1. Rubber plug is established only on models with 4-cylinder engines 2. Stabilizer of cross stability 3. Plug of the stabilizer of cross stability 4. 35 N. of m. 5. Arm 6. Clip it is necessary to install the plug of the stabilizer of cross stability correctly 7. 40 N. of m. 8. 40 N. of m. after twisting till the required moment of an inhaling turn in addition on a quarter of a turn (90 °) 9. Bolt and washer always replace 10. Plug of the lever of a forward suspension bracket 11. Rubber plug of the stabilizer of cross stability 12. 65 N. of m. 13. Spherical hinge note the provision of installation at removal from a rack of the wheel bearing adjust disorder of forward wheels after installation 14. Lever of a forward suspension bracket differ on a design on the left and right side 15. Plug insert into the rubber plug |
16. Connecting draft establish so that sides were at right angle to the direction of the movement of the car 17. 35. N of m. turn in addition on a quarter of a turn always replace 18. Washer always replace 19. Plug of the stabilizer of cross stability 20. Bolt the head has to look forward 21. 65 N. of m. 22. Plug 23. 20 N. of m. 24. Back plug of a cross-piece of a forward suspension bracket 25. Cross-piece of a forward suspension bracket various modifications for models with 4-and 5-cylinder engines delay fastenings in the following order: 1. Back left 2. Back right 3. Forward left 4. Forward right 26. Forward plug of a cross-piece of a predny suspension bracket |
Prevention