a43d3481

12:42. Internal finishing of a body

Finishing of a forward door, its components

1. Crosswise screws, 1.5 N. of m.
2. Connection of the panel (back)
weaken and take out from a frame
3. The control unit in an armrest
4. Crosswise screws, 2.5 N. of m.
fix an armrest to the panel of internal finishing of a door
5. Armrest (lower part)
the spline is inserted into a cut in the top part
6. Crosswise screw, 1.5 N. of m.
7. Laying
8. Panel of internal finishing of a door
9. Insulating material
it is attached to the finishing panel by means of clips
10. Laying for fixing brackets of the panel of internal finishing
fix by means of adhesive substance

11. Finishing detail
it is not required to remove it together спанелью internal finishing
12. Adjustment of height
13. Connection of the panel (forward)
weaken and take out from a frame
14. Internal mechanism of opening of a door
press in the direction specified by an arrow and get from the door panel having removed draft
15. Blocking button
removal
turn approximately on 120 ° to the left and extend
installation
insert (the blocking button has to be 16 mm above the directing ring) turn on 120 ° to the right


Finishing of a back door, its components

1. Connection of the panel (back)
weaken and take out from a frame
2. Crosswise screws, 1.5 N. of m.
3. Armrest (top part)
4. Screws with a six-sided head, 2.5 N. of m.
5. Armrest (lower part)
the spline is inserted into a cut in the top part
6. Crosswise screw, 1.5 N. of m.
7. Laying
8. Panel of internal finishing of a door
9. Laying for fixing brackets of the panel of internal finishing
fix by means of adhesive substance
10. Height regulator
11. Connection of the panel (predny)
weaken and take out from a frame

12. Blocking button
to remove the button it is not obligatory to disassemble it
removal
turn approximately on 120 ° to the left and extend
installation
insert (the blocking button has to be 16 mm above the directing ring) turn on 120 ° to the right
13. Internal mechanism of opening of a door
press in the direction specified by an arrow and get from the door panel having removed the lever a pusher

Components of finishing of a forward door (Coupet's model)

1. Lock washer
2. Isolation
it is attached to the panel of internal finishing
by means of clips
do not use a washer anew if it is damaged
3. Lock washer
4. Panel of internal finishing of a door
it is attached to a door by means of clips
7. Armrest arm
2,5 N. the m is fixed by means of the screw.
8. Armrest
9. The self-cut screw with an internal hexagon, 2,5 N. of m, an internal side
4,0 mm.
10. Crosswise screw, 2.5 N. of m.
11. Control panel

12. Panel of internal finishing of a door
to remove the finishing panel, pull it up
13. The internal mechanism opening a door
press forward and get from the finishing panel of a door
disconnect from the pusher lever
14. Guide of the blocking button
15. Blocking button
removal
turn on 180 ° and get from the finishing panel
to remove the blocking button, it is not obligatory to disassemble it
16. Height regulator