a43d3481

12.4. Forward guard


Forward guard (Sedan models)
1. A bolt with a six-sided head, 23 N. of m.
2. The self-cutting screw, 7.5 N. of m.
3. Guard, lower section
it is possible to remove together with the central section
4. The self-cutting screw, 7.5 N. of m.
5. A bolt with a six-sided head, 23 N. of m.		 6. The bearing lock plate
it is possible to remove together with the central or lower section
7. Metal ear
at removal of a guard pull it directly down for a corner
8. The self-cutting screw, 7.5 N. of m.
9. Guard, central section

Forward guard in collecting (Coupet's model)
1. A bolt with a six-sided head, 23 N. of m.
2. The self-cutting screw with a washer
3. Guard, central section 		4. Guard, lower section
5. The self-cutting screw with a washer

Removal

PERFORMANCE ORDER
1) remove a bumper
2) remove a front grille
3) unscrew the decorative panel (arrows)
4) pull out a guard from the condensing ring to the right or to the left

Removal for the Sedan model

PERFORMANCE ORDER
1) through an opening for access remove the holder of a rope and disconnect a rope
2) unscrew screws of a casing of stitched air (arrow)
3) to remove a guard, pull it under a wing down

Removal for Coupet's model

PERFORMANCE ORDER
1) remove a bumper
2) remove a front grille
3) disconnect a cowl rope
4) unscrew screws of a decorative covering (arrow) and pull out it from the condensing ring
5) unscrew an air duct of the cooling air and an arm of a radiator (arrow)
6) unscrew an arm of the oil heater
7) disconnect the switch of a lamp of motor office
8) disconnect a connecting loop on the guard panel
9) unscrew the directing device of the soaked-up air (arrow)

Installation

Carry out installation upside-down.