12:34. Bumper casing

Front bumper, assembly
1. 30 N. of m.
2. 23 N. of m.
3. Absorber of shock loading
4. Bumper crossbeam
for removal it is necessary to remove a bumper casing
5. The central decorative
removal: pull out from under the fixing pads (the bumper has to be sorted, and the crossbeam is removed)
6. Broad nut
7. Towing hook
8. The marked openings
9. Holder of registration plate
10. M5x12 bolts
11. Decorative facing (5 cylinders)
12. Decorative facing (4 cylinders)
13. Bumper casing
14. The extending clamp
15. Plastic nut
16. Rubber washer
17. Decorative strip
18. Cover
19. Arm
20. 30 N. of m.
21. Guide

Bumper casing, removal

1) remove the extending fixing agents (insert)
2) disconnect from a guide and press for the ends in the direction (arrow A) down
3) remove a cover from a decorative strip and unscrew bolts
4) disconnect the fixing pads from a bumper crossbeam
5) remove decorative facing in the direction specified by an arrow B

Towing hook, installation

1. Rivet

2. Prekladina

3. Kronsheyn of the towing hatch

Arm, installation

1. Crossbeam

2. Rivet

3. Arm

On all-wheel drive models the left absorber of shock loading fastens to a cross-piece an additional bolt. Tighten this bolt until 23 N. of m.

Front bumper, assembly (Coupet's model)

1. A bolt with a six-sided head, 23 N. of m.
2. Washer
3. Blow absorber
removal: remove a bumper
unscrew bolts with a six-sided head
4. Washer
three washers on each absorber
5. Bolts with a six-sided head, 23 N. of m.
6. Washer
7. A bolt with a ploskokonichesky head, 23 N. of m.
8. Spoiler
removal: remove a bumper
remove the extending clamps
unscrew a spoiler from a wheel niche
unscrew the top fixing bolts on a spoiler
disconnect washers of forward headlights if they are established
remove a spoiler, having pulled out it directly from a body
9. Fog light
if it is established, then there is no need to remove it during removal of a spoiler
10. Bumper crossbeam
for removal it is necessary to remove first of all a casing of a bumper and a decorative covering
11. Decorative strip
12. Bumper casing
it is possible to remove after the bumper is disconnected
13. M 6 N.' bolt / washer.
14. Arm
in installation time the spoiler needs to be established on an arm
15. M 6 N.' bolt / washer.
16. Washer
17. M 1,0 N.' screw.
18. The self-cut screw with a ploskokonichesky head
19. Holder of registration plate
20. Nut
21. Washer
remove a bumper
from within unscrew bolts with a six-sided head
in front remove a washer jet
22. Six-sided nut
the headlight washer jet fixes