12:24. Trunk lid activator
Trunk lid activator
Removal
| PERFORMANCE ORDER |
| 1) remove decorative finishing of the right back dimensional lamp; for weakening of a lock ring the leading activator has to be in situation "the door is open" |
| 2) pushing a lock ring down, carefully you hold draft of lever transfer 2 |
| 3) extend draft of lever transfer from the activator |
| 4) unscrew assembly bolts and remove a pressure head / vacuum hose |
|
Installation
Carry out installation upside-down, in view of the following:
| PERFORMANCE ORDER |
| 1) the pressure head / vacuum hose has to be between draft of lever transfer of the lock and an internal part of the hatch of a luggage carrier |
| 2) to collect draft of lever transfer 2, it is necessary that the lock and the activator were in open situation |
| 3) press draft 2, pushing a lock pin 1 up |
|
Trunk lid activator (Coupet's model)
Removal
| PERFORMANCE ORDER |
| 1) remove decorative finishing of the right back dimensional lamp; for weakening of a lock ring draft of lever transfer has to be in situation "the door is open" |
| 2) carefully keeping draft of lever transfer, push a lock ring 2 in the direction specified by an arrow |
| 3) pull out draft from the activator |
| 4) remove a pressure head / vacuum hose and unscrew fixing bolts (shooters) |
|
Installation
Carry out installation upside-down, in view of the following:
| PERFORMANCE ORDER |
| 1) the pressure head/vacuum hose has to be between draft, the lock and the decorative panel of a luggage carrier |
| 2) to establish draft of lever transfer 1, the lock and the activator have to be in situation "the door is open" |
| 3) push draft, a lock ring up |
| 4) do not squeeze draft of lever transfer |
|
