Audi:: 80 B3:: Forward door, lower door loop

12:11. Forward door, lower door loop

Forward door in assembly

1. Overlay of a groove of a door
only on Audi-90 models
for removal pull out from the top part of an upholstery of a door
2. The condensing laying, back
3. Adjusting washer
4. Bolt, 8 N. of m.
5. Shock-proof whetstone
6. Door covering
7. The extending clamps
8. Bolt, 8 N. of m.

9. A door loop, lower, with the limiter of opening of a door
10. Bolt, 30 N. of m.
11. The plug with cutting
12. Door loop, top
13. Bolt, 30 N. of m.
14. Sealant of a window groove, external
removal is possible only on condition of removal of the holder of a window
15. The condensing laying, forward

Forward door, removal

PERFORMANCE ORDER

unscrew bolts with a six-sided head (arrow)

Installation

Carry out installation upside-down, in view of the following:

PERFORMANCE ORDER

1) establish bolts with a six-sided head
	2) apply AOS 126 000 05 lubricant or equivalent on the specified places of the lower door loop

Forward door in assembly (Coupet's model)

1. Sealant of a window groove
removal is possible тольуко on condition of removal of the holder of a window
2. The extending clamp
3. Shock-proof whetstone
4. A bolt with a six-sided head

5. Plug
6. A door loop, with the limiter of opening of a door
7. Door loop, top
8. A bolt with a six-sided head, 40 N. of m.
9. Door

Forward door, removal

PERFORMANCE ORDER

disconnect electric wires of the regulator of a window, door locks and a mirror

Forward door, installation

Carry out installation upside-down.

PERFORMANCE ORDER

1) level and adjust a door
2) check and adjust as it is necessary, the window regulator
3) connect all electric wires and sockets
4) check, the window regulator, mirrors and door locks how correctly function
	5) apply AOS 126 000 05 lubricant or its equivalent on the specified places (shooters) of the lower door loop

Forward door, replacement

Since VIN 8B MA 008 401, the door covering was changed. Therefore as the spare part only the doors executed in new style will be available. At installation of a new door on the old car, it is also necessary to make installation or replacement of the following details:

1 – decorative door panel;
2 – window regulator;
3 – the external door condensing laying;
4 – flat nut / washer;
5 – cover of the decorative panel;
6 – basis of the holder of an external mirror.