12:18. Adjustment of doors
|
|
adjust a gap, displacing door loops
and = 5 + 1 mm
b = 5.5 + 1 mm
level height with the line of the case |
The place of adjustment – a loop (very big openings on a loop in the place where she joins the forward / central rack of a body).
To avoid noise from air, regulate on assembly loops or in a back part of doors on a pin of a locking plate.
Sections A-and, B-B, C-C:
with = 0.5 + 0.5 mm
Section D-D:
d = 14.5 mm
Door gap, adjustment
| PERFORMANCE ORDER |
|
1) having unscrewed bolts 1, unscrew the plug with cutting which is behind bolts until it does not cease to adjoin to a forward rack of a body |
2) weaken bolts 2, close a door and adjust a gap, moving a door
and = 5 + 1 mm |
| 3) weaken or tighten by means of a wrench |
|
4) screw up the plug with cutting until she does not contact with a forward rack of a body |
| 5) screw up bolts and clamp them with m 30 N.' moment. |
| 6) check a gap |
|
Adjustment of height
| PERFORMANCE ORDER |
|
1) weaken bolts 1 and 2 |
| 2) weaken or tighten by means of a wrench |
| 3) move door loops |
| 4) tighten bolts; 30 N. of m. |
|
5) weaken bolts (shooters), and displace a door in the necessary direction |
|
6) tighten bolts; 30 N. of m.
|
|
Prevention of noise from wind
|
|
1 – the screwed detail of the threaded connection 2 – a washer with bowl-shaped dredging
3 – washer |
Two washers with bowl-shaped dredging can be in case of need used.
| PERFORMANCE ORDER |
| 1) adjust the screwed detail of the threaded connection of a latch in a back part of a door |
| 2) the screwed detail of the threaded connection of 50 N. of m. |
|
Doors, adjustment (Coupet's model)
| PERFORMANCE ORDER |
| 1) adjust a door gap, displacing door loops |
| 2) establish the door height (a body contour). Adjustment is made on loops (very big openings on a loop in the place where the loop fastens to a forward rack of a body) |
| 3) for prevention of emergence of noise from wind regulate assembly loops of a door or in a back part of a door on a locking plate |
|
4) weaken bolts 2, 4 by means of a wrench |
| 5) unscrew the plug with cutting on bolts 2 from a forward rack of a body |
| 6) close a door and displace it for adjustment of a gap |
| 7) twist the plug with cutting 3 until is contact with a forward rack of a body |
|
8) screw up bolts and tighten them with m 30 N.' moment. |
| 9) double-check a gap |
|
Adjustment of height
| PERFORMANCE ORDER |
|
1) weaken bolts 2, 4 by means of a wrench |
|
2) unscrew the plug with cutting on bolts 2 from a forward rack of a body |
| 3) close a door |
| 4) displace door loops |
| 5) tighten bolts with m 40 N.' moment. |
|
Noise from wind in a forward part of a door, prevention
| PERFORMANCE ORDER |
|
1) weaken bolts 1 |
| 2) displace a door as it is required
|
| 3) tighten m 30 N.' bolts. |
|
Noise from wind in a locking plate, prevention
| PERFORMANCE ORDER |
|
adjust a clamp pin in a back part of a door pin of a clamp of 16 N. of m.
1 – clamp pin
2 – shock plate
3 – substrate
for achievement of exact adjustment more than one can be established |
|
Door gap, adjustment (Coupet's models since 1990 model years)
| PERFORMANCE ORDER |
|
1) having unscrewed bolts 1, unscrew the plug with cutting until it does not cease to adjoin to the central rack of a body |
2) weaken bolts 2, close a door and adjust a gap, displacing a door
and = 5 + 1 mm |
| 3) open a door and tighten bolts 2 with m 30 N.' moment. |
Prevention
Unscrew or screw up, using a key of 2598.
|
|
4) twist plugs with a carving 3 until they do not adjoin to the central rack of a body |
| 5) screw up bolts, 30 N. of m. |
| 6) check a gap |
|
Door height, adjustment
| PERFORMANCE ORDER |
|
1) weaken bolts 1 and 2 |
Prevention
Unscrew or screw up, using a key of 2598.
|
| 2) displace door loops in very big openings |
| 3) tighten bolts with m 30 N.' moment. |
|
Noise from wind, elimination
| PERFORMANCE ORDER |
|
1) weaken bolts of a forward door (arrow), displace a door in grooves of loops |
|
2) distance between a framework of a door and the central rack of a body
d = 14.5 mm |
| 3) tighten bolts with m 30 N.' moment. |
|
Back door, elimination of noise from wind
|
|
1 – shock washer 2 – a washer with bowl-shaped dredging
Two washers with bowl-shaped dredging can be in case of need established.
|
Adjustment of a pin of a clamp of the lock of a door allows to eliminate noise in a back part of a door.
| PERFORMANCE ORDER |
| 1) adjust a clamp pin |
| 2) 50 N. of m. |
|
