12.5. Forward wing
Forward wing, assembly (Coupet's model)
1. Nut
2. The self-cutting bolt with a washer, 8 N. of m.
3. The self-cutting bolt with a washer
4. Wing
5. The extending nut |
6. Wing arm
7. The self-cutting bolt with a washer, 8 N. of m.
8. Washer
9. The condensing ring
10. The condensing laying |
Forward wing, removal
| PERFORMANCE ORDER |
| 1) remove a front bumper |
| 2) remove laying of a cavity of a wheel |
|
3) remove the condensing laying (shooter) |
|
Installation
Install all components in the return to removal an order, in view of the following:
| PERFORMANCE ORDER |
|
1) establish a rivet of a basic arm of a cowl (arrow A) |
| 2) establish a rivet of a stopper of a door (arrow B) |
|
3) establish strips of a sealing cord, 1, 2 and sheet laying with a bolt And on a stopper
1 = 480 mm in length and 7.0 mm in the diameter
2 = 250 mm in length and 7.0 mm in the diameter
|
|
Use a sealing cord of AKD 497 010 04 R10 or an equivalent, and squeeze it to the sizes of 7.0 mm in the diameter.
Adjustment of a forward wing, cowl gap
| PERFORMANCE ORDER |
| 1) weaken all bolts of a wing |
| 2) having weakened bolts, adjust a gap, moving a wing |
|
3) having weakened bolts, adjust a gap, moving a wing
and = 4.5 + 1.0 mm |
|
Prevention
Numbers of details are intended only for reference. Always apply for the latest information to your dealer.
The sealing cord will need to be squeezed to diameter in 7.0 mm
