a43d3481

2.2.6. Vacuum final valves

Removal

PERFORMANCE ORDER
1) on cars with the 4-cylinder engine remove the pump together with rubber laying from a fixing arm up and aside; on cars with the 5-cylinder engine remove the pump from a fixing arm down
2) remove a protective plate from below on the left side of an instrument guard
3) remove the electronic socket of connection from the vacuum final valve

 

4) by means of "J" of the-shaped tool remove the valve behind from the plug

Installation
PERFORMANCE ORDER
1) install the valve by a hand
2) screw the valve in the plug as it is possible further by means of a key on 10 mm
3) pull a pedal of a brake (coupling) back as it is possible further
4) slowly release a pedal
5) the valve is adjusted now