2.2.1. Accumulator
Accumulator
1. Negative plug (smaller diameter) clear oxidation traces grease with acid-resistant lubricant 2. Positive plate (dark brown) 3. Divider (from dielectric material) 4. Negative plate (metal gray color)
|
5. Electrolyte level indicator
if it is necessary, fill in the distilled water to the indicator
6. Positive plug
(bigger diameter)
clean off oxidation traces
grease with acid-resistant lubricant
7. Cap of a jellied opening |
Accumulator, check / charging
Prevention
Before work with system of electric equipment, disconnect a wire of the negative plug of the accumulator.
The accumulator, start of the engine from the second accumulator
Prevention
The car engine with the charged accumulator has to be switched off at connection of cap wires.
| PERFORMANCE ORDER |
|
1) connect cap wires as follows:
1. One end of a positive wire to the positive plug of the charged accumulator
2. The second end of a positive wire to the positive plug of the discharged accumulator
3. One end of a negative wire to the negative plug of the charged accumulator
4. The second end of a negative wire to "mass" of the car with the discharged accumulator |
| 2) the first start the car engine with the charged accumulator |
| 3) then the car engine with the discharged accumulator |
| 4) disconnect cap wires upside-down |
|
