a43d3481

10.2. Hydraulic components

Support of a forward brake – Girling

1. Dustproof
2. Piston
3. Dustproof ring
4. Arm of brake shoes
if protective caps were damaged, establish a repair kit, a detail 443 698 470
grease the directing pins with the enclosed lubricant
5. Piston epiploon
6. Support
7. 35 N. of m.
always replace
at untwisting / twisting hold the directing pin a key with a cap head
8. Screw of an opening of production of air

At repair use all elements of repair set.

Support of a forward brake – Teves

1. The directing pin
Inhaling moment: 25 N. of m.
2. Screw of an opening of production of air
3. Support
4. Piston epiploon
5. Dustproof cover
6. Piston
7. Arm of brake shoes
8. Rubber plug
9. Plug
10. Dustproof cap
11. Cap

At repair use all elements of repair set.


Prevention

Before installation grease epiploons and pistons of supports with VW lubricant of the brake cylinder or similar to it.


Support of a back brake – Girling

1. Самоконтрящиеся bolts.
Inhaling moment: 35 N. of m.
always replace
hold the directing pins when twisting and untwisting
2. Support
replace a support if it proceeds in an installation site of the lever of the emergency brake
3. Piston epiploon
4. Piston
5. Dustproof ring
6. Arm of brake shoes
if protective caps were damaged, establish a repair kit, a detail 443 698 470
grease the directing pins with the enclosed lubricant
7. Protective cap
8. The directing pin
grease before installation of a protective cap
9. Screw of an opening of production of air
10. Dustproof cap

At repair use all elements of repair set.

New supports of brakes are on sale filled with brake fluid and pumped over.

Grease pistons and cylinders of supports, and also epiploons with a thin layer of liquid of the brake cylinder before installation.

Support with two pistons – for all-wheel drive and models from 20 valvate engines, and also compartment models

1. Screw of an opening of production of air
grease a screw carving with a thin layer of liquid of the brake cylinder before installation
2. 35 N. of m.
3. Support
4. The directing pin
grease before installation of a cap
5. Cap
fastens to an arm of blocks and the directing pin
6. Arm of brake shoes
grease the directing pins with the enclosed lubricant
if protective caps were damaged, establish a repair kit, a detail 443 698 470 which is on sale as the spare part with previously greased directing pins
7. Dustproof ring
put on an outer edge the piston
the inner edge is established in a flute on a support
8. Piston
9. Piston epiploon
10. Dustproof cap

At repair use all elements of repair set.


Prevention

Before installation grease epiploons and pistons of supports with VW lubricant of the brake cylinder or similar to it.