a43d3481

9.2.3. Removal and installation of the back bridge

Removal

PERFORMANCE ORDER
1) remove back wheels
2) remove the equalizer of ropes of the emergency brake (the top arrow)
3) remove a rope of the emergency brake from clips on fixing arms (the lower shooters)
4) remove the directing plug of a rope of the emergency brake from fixing arms (are specified by shooters)
5) disconnect brake hoses from brake tubes (the right arrow)
6) remove nuts of fastening of the hook-on device (the left arrow). Do not take out bolts
7) disconnect a spring of the regulator of pressure of brakes from the back bridge

8) remove the bolt fixing a cross jet bar (the lower arrow)
9) remove bolts of the lower fastening of a rack of a suspension bracket (the top arrow)
10) remove bolts of fastening of the hook-on device (performance of this operation requires two persons)
11) remove the back bridge

Installation

Installation is made in the sequence, the return to removal. At the same time pay attention to the following:

pump over the brake system, adjust a parking brake.