| 1) disconnect a wire of the negative plug of the accumulator for shutdown of system of the airbag of safety |
| 2) establish forward wheels directly |
| 3) remove the safety airbag |
|
4) remove a casing of the block of switches of a steering column (it is specified by shooters) |
|
5) disconnect the socket of connection of the airbag of safety located under a casing of the block of switches of a steering column. For this purpose, by means of the screw-driver, press a uvula (it is specified by an arrow) on the edge of the socket |
| 6) remove a steering wheel |
| 7) weaken a clip on the block of switches of a steering column and remove the block of switches |
|
8) remove the screws (are specified by shooters) fixing an instrument guard |
| 9) disconnect the socket of connection and remove an instrument guard |
| 10) disconnect the ignition lock socket from the lock of a steering column |
|
11) turn off four bolts of fastening of the knee buffer and remove a cap (it is specified by an arrow) |
| 12) disconnect control sockets from the knee buffer and remove them aside |
| 13) remove the knee buffer |
|
14) disconnect the basis of a shaft of a steering column (it is specified by shooters) from a fixing arm |
| 15) by means of the screw-driver about 15 mm long, accurately remove a cover from a shaft of a steering column |
|
16) turn off the nuts (are specified by shooters) fixing a casing of a steering column / a fixing plate to a fixing arm |
| 17) lower a steering column down and turn it so that it it was possible to remove from below dashboards |
