9.3.1. Technical characteristics
|
Model
|
Tire size
|
Wheels
|
Depth of a disk/diameter of a ring of bolts of fastening of a wheel
|
|
Audi-80
|
175/70 HR 14
|
5-1/2 J x 14 *
|
45/108
|
|
Audi-90
|
195/60 HR 14
|
6 J x 14
|
45/108
|
|
Spare wheel
|
115/70 R 15
|
4 J x 14
|
56/108
|
|
125/90 R 15
|
4 J x 14
|
45/108
|
* wheels with steel disks
Wheel assembled
|
1. Tire
on forward wheels it is recommended to install tires with deeper protector install tires only of identical type and with the identical drawing of a protector 2. A fixing spring for a balancing small weight 3. Balancing small weight on cast disks small weights fasten by means of glue 4. Wheel cap |
5. Bolt of fastening of a wheel inhaling moment: 110 N.m. M14 x 1.5 x 27.5 mm 6. Wheel disk 5-1/2J X 14, depth of a rim is 45 mm (for wheels with steel disks) 6 J X 14, depth of a rim is 45 mm (a disk from light alloys) 7. Camera valve install the new valve when replacing a wheel |
Wheel with a light-alloy wheel
|
1. Tire
for safety of the tire have to be replaced only with couples on forward wheels it is recommended to install tires with deeper protector install tires only of identical type and with the identical drawing of a protector 2. Balancing small weights for installation: clear a wheel rim of oil and lubricant, remove a protective film from a small weight and paste it on a disk 3. A light-alloy wheel – trellised design 6J x 14 |
4. Nave cap 5. Cap the blocking cylinder is installed 6. Blocking cylinder is established on a wheel bolt 7. Bolt of fastening of a wheel inhaling moment: 110 N.m. M14 x 1.5 x 27.5 mm 8. Camera valve install the new valve when replacing a wheel |