|
1) And – at the installed engine – establish a flywheel in the top dead point – the cylinder 1 (it is specified by an arrow) In – at the removed engine – establish a tag on a vibroquencher (pulley) opposite to a tag on a belt cover (it is specified by an arrow) |
|
2) level a tag on a cam-shaft asterisk with a cover of a head of cylinders (it is specified by an arrow)
|
|
3) install the distributor so that the rotor was directed to a tag for the cylinder 1 on a distributor casing (it is specified by an arrow)
|
4) clear a distributor cover before installation
|
5) check it regarding cracks and traces of soot as result of sparking, if necessary replace
|
6) adjust an ignition advancing corner
|
Prevention
Idling speed, installation of a corner of an advancing of ignition and contents WITH are interconnected and have to be checked and be regulated together.
|